Honda 115 Volt Electric Stainless Steel Submersible Water
Pump Models in Sizes From 1 1/4 Inch to 2 Inch.
Honda Submersible Water Pump Standard Features Include:
Mercury Free Automatic Start and Stop Float Switch
Stainless Steel Housings, stainless steel or noryl impellers
UL Approved and Equipped with automatic resetting Thermal Overload Protection
General Purpose Pumps. Will pass rocks, mud clods up to 3/8 inch diameter
Trash Pumps Can Pass Small Sticks, Rocks, Etc. Up to 2 inches in diameter
HONDA  WSP50 SUBMERSIBLE ELECTRIC WATER PUMP
  • 2 Inch female side discharge port NPT
  • 110 Gallons Per Minute Maximum
  • 25 Foot Power Cord
  • Passes 2" Solids
  • Starting Amps 34, Running Amps 8.3, 1/2 HP motor
  • 36 Lbs, 9"W x 21.5"H 9" Diameter
  • Stainless Steel Housing and Impeller
  • One Year Warranty
WSP100 HONDA SUBMERSIBLE WATER PUMP 115 VOLTS
  • 2 inch Female side discharge port NPT
  • 42 Foot Maximum Head Lift
  • 150 Gallons Per Minute Maximum
  • 18 PSI Maximum
  • 25 Foot Power Cord
  • Passes 2" Solids
  • Starting Amps 47, Running Amps 11.1, One HP motor
  • 41 Lbs, 9.0"W x 22.8"H 9" Diameter
  • Stainless Steel housing and impeller
  • One Year Warranty
HONDA  WSP73 SUBMERSIBLE 115 VOLT WATER PUMP
  • 1 1/2 inch female npt top discharge port
  • 54 Foot Maximum Head Lift
  • 74 Gallons Per Minute Maximum
  • 23 PSI Maximum
  • 50 Foot Power Cord
  • Passes 3/8" Solids
  • 3/4 HP Motor, Starting Amps 48, Running Amps 12.2
  • 27 Lbs, 8.3"W x 17.2"H 8.3" Diameter
  • Stainless Steel housing and Impeller
  • One Year Warranty
WSP53 HONDA SUBMERSIBLE ELECTRIC WATER PUMP 115 Volt
  • 1 1/2 inch female npt top discharge port
  • 70 gpm 44 Foot Max Head Lift
  • Top discharge port, 19 PSI Maximum
  • 50 Foot Power Cord
  • Passes 3/8" Solids
  • 1/2 HP Motor, Starting Amps 36, Running Amps 9
  • 27 Lbs, 8.3"W x 17.2"H 8.3" Diameter
  • Stainless steel housing, Stainless Steel Impeller
  • One Year Warranty
  • 1 1/4 inch female npt top discharge port
  • 40 gpm 23 Foot Max Head Lift
  • Top discharge port, 10 PSI Maximum
  • 20 Foot Power Cord
  • Passes 3/8" Solids
  • 1/3 HP 115 Volt Motor, Starting Amps 10, Running Amps 4
  • Shielded ball bearing motor
  • 27 Lbs, 8.3"W x 17.2"H 8.3" Diameter
  • Stainless steel housing, Thermo plastic Noryl Impeller
  • One Year Warranty